PROGRESSIVE EDUCATION SOCIETY'S

MODERN COLLEGE OF ENGINEERING, PUNE

Approved by AICTE, Affiliated to Savitribai Phule Pune University

Contact Us ADMISSION ENQUIRY
MCOE Web Mail  Admission Enquiry ERP Login Admission Assistant
Recognized by the Govt. of Maharashtra   | Affiliated to Savitribai Phule Pune University   | NAAC Accredited With "A++" Grade   | NBA Accredited "Electronics and Telecommunication" Engineering UG programme   | NBA Accredited "Electrical Engineering" UG programme   |
 Academics     Departments     Electrical Engineering
Labs
Labs
Labs
Labs

Lab Details

Research/Innovation Laboratory

This laboratory is specially dedicated for Research activities. The laboratory is well equipped with various instruments, kits and accessories. like DSO, Process control Unit, Servo transmitter and receiver, Position Control of servomotor. Technical softwares like MATLAB-SIMULINK, SIMPOWER, PLC SCADA and LABVIEW are available for analyzing different applications.

Lab In-charge : Dr.Mrs.H.H.Kulkarni/Mrs.Mugdha Bhajekar

Sr.No. Details of equipment Qty
1 Digital Power Meter 1
2 3000A Clamp meter 3
3 500A Clamp meter 3
4 BNC to Banana conversion Adapter 3
5 To identify and Solar PV Module with series and/or parallel combination 1
6 I-V and P-V charac. And series and parallel combination of solar PV modules for diff. isotation and temperature effects 1
7 To evaluate effect of shading and tilt angle on I-V and PV characteristics of solar module 1
8 To evaluate the performance of vertical axis wind turbine 1
9 To evaluate the performance of vertical axis wind turbine 1
10 Weather Monitoring System 1
11 50 MHz Digital Storage Oscilloscope 1

Project laboratory

The laboratory is well equipped with the software’s and measuring instruments.

Lab In-charge : Mr. D.K.Joshi

Sr.No. Major equipment
1 ETAP Software
2 MATLAB Software
3 Lenovo Think  Computers i5-
4 Printer HP Laserjet 1020
5 Digital Storage Oscilloscope
6 DC Power Supply dual
7 Function Generator
8 Dimmerstat
9 L.C.R.Q meter
10 Digital Multimeter

Research potential Projects

Sr.No. Title of the Project
1 Design of Permanent magnet brushless DC Motor
2 Improvement of Electric Vehicle Efficiency using Filter
3 Design development and Fabrication of prototype model of STATCOM for reactive power compensation
4 Scale on model of Electric Vehicle (EV) using electronic differential and Ackerman steering
5 Design of Dynamic Voltage Restorer (DVR)
6 Front End Based Converter Power Conditioning Unit
7 Design and analysis of 1MVA Axial Permanent Magnet Alternator by using Maxwell Software
8 Rejection analysis and improvement in residual current breaker at 100% inspection stage
9 Design of Ultra capacitor test system
10 Development of Electrode Material for Super capacitor
11 Design and development of application of linear Induction Motor
12 ROGOWISKI coil with active integrator for high current measurement
13 Design and development of single phase pure sine wave inverter with renewable energy source
14 Root locus analysis of RCBO failure and testing of finished distributed products

Computer Laboratory

The laboratory is well equipped with various licensed technical software like Lab view, MATLAB and also application software and System software. Practical Sessions are performed on MATLAB using SIMULINK, SIMPOWER and control toolbox for analyzing different systems. In the computer laboratory separate computer per student per batch is available. Each computer has latest configuration. The networked laboratory is having high speed Internet facility. The students have access to many international technical papers and journals. Additional Authorized License copy of software's are also installed.


Lab In-charge : Mr. D.K.Joshi

Sr.No. Major equipment
1 LCD Projector MEC Multisync. VT 460 Data Display device
2 Hub 24 port D-link
3 CD Writer 52X Samsung
4 Printer Epson LX300
5 Printer HP 3550
6 Scanner
7 Processor 2.6GHz
8 M/Board 845
9 Ram DDR 256
10 HDD 404B Samsung
11 FDD 1.44 Sony
12 CD ROM L652 X
13 Keyboard Samsung
14 Mouse
15 I Botp - Atx
16 Monitor 15" Samtron
17 Server 2.4GHz
18 SMPS 3 watt
19 MATLAB Software
20 PIV,3.2GHz,800FSB,Intel
21 Laptop compaq presario
22 Multimedia Benq LCD Projector
23 Printer LX 300 EPSON
24 52xSony CD Writer
25 Printer HP 2360 Deskjet
26 Hard Disk 80GB Segate
27 HP Laserjet 1020
28 Epson LX 300+
29 HP Laserjet P2035
30 HP Officejet (6000E)
31 Lenovo think centre edge 72 desktop/ m72 intel core I5 3470S Processor
32 Server Intel Xeon 3.1 gHz , 16 GB, Ddr3, 2x160, 6b/500 Gb data HDD
33 Printer 1020 HP Laserjet
34 Scanner Canon Lide 110 + Scanner

List of Practical's conducted:

  • Power System operation and control
  • Power System-II
  • Control System II
  • Control System I
  • NMCP

Microcontroller Laboratory

Highly sophisticated Microprocessor lab is equipped with advanced microprocessor, micro controller, and VLSI and network analysis kits. The students also have access to various simulators, Assemblers and Debuggers, which help them to work on different real time projects. Laboratory has micrologix Allen Bradley PLC and Wonder touch SCADA software along with integrated control system panel. Temperature monitoring and control kit is used to develop the ladder diagram programming skills. Process simulation applications are developed for better understanding of process.



Lab In-charge : Mrs.Shweta Jain/Ms.Kranti J.Rahane

Sr.No. Major equipment
1 MF-DYNA-85L 8085 Microprocessor training & Development kit with LCD display
2 CAB-CON Cable & Connector set
3 DYNA-PIO/2 8255 study card
4 DYNA-TIMER 8254 study Card
5 DYNA-SERIAL 8251 Study Card
6 STP-PIO Stepper motor controller card
7 STP-PIO Stepper motor
8 DYNA-INTR 8259 Study Card
9 DYNA-KBDISP 8279 Study Card
10 DYNA-DMA 8257/8237 DMA Control Study Card
11 D to A Converter
12 ADC-01 A to D Converter
13 TEMP PIO Temperature controller card using pt 100
14 RELAY PIO Relay, Opto controller card
15 Microfriend Dyna-51 8031/51 based Micro Controller Trainer with LCD display & Power supply
16 CaB-CON Cable & Connector set with keyboard for Dyna-51
17 1Ph. Dimmerstat
18 Function Generator
19 C.R.O.
20 L.C.R.Q Meter
21 D.C.Power Supply
22 Superposition theorem kit
23 Thevenin's theorem kit
24 Max.power transfer theorem kit
25 Reciprocity theorem kit
26 Millmans theorem kit
27 R-C ckt
28 R-L ckt
29 R-L-C ckt.
30 kit for determination of parameters of two port network
31 kit for determination of resonance, bandwidth and Q-factor of R-L-C series circuit.
32 kit for determination of resonance of R-L-C parallel circuit.
33 Spartan-III Trainer model MXSF3FX-IM for VLSI
34 34 STK PIC-18F458 PIC 18F 458 development board with PIC kit 2

List of Practical's conducted:

  • Electrical and Eelectronics Engineering
  • Advanced Microcontroller
  • Workshop
  • Power Quality

Power Electronics & Drives Laboratory

To augment the electronics practical knowledge of electrical students The Power electronics laboratory is equipped with all modern and latest equipments including Digital Storage Oscilloscopes, various analog, digital and power electronics kits. The provision of the extra hours for practice turn is utilized by the students.



Lab In-charge : Mrs.R.S.Hardas /Mrs.N.M.Waikar

Sr.No. Major equipment
1 Study of VI characteristics of SCR,DIAC,TRIAC,MOSFET, IGBT, GTO & Display circuits (26MR)
2 Different methods of turning OFF the SCR (forced commutation methods A,B,C,D,E) (9 MR)
3 Study of SCR Converters with R,L,C loads (low voltage version) (5/6 MR)
4 Different methods of turning ON of the SCR (R,RC,UJT) (2MR)
5 Study of SCR Converters ( high voltage version) (SPSF with motor)
6 3 Ph.half & Full Converter (low voltage) (22 MR)
7 Study of Jones Chopper (30V operation.
8 Triggerring circuits for choppers using (MOSFET's or SCR ) (20 MR)
9 Study of 1 ph.SCR,series inverter (19 MR)
10 Studyof 1 phase PWM inverter (25 MR)
11 Design of Snubber for dv/dt limitation of SCR. (3 MR)
12 Electrical braking of 3ph.Induction Motor (speed control of Induction Motor using MOSFET based PWM inverter 4 MOSFET power integrated circuit (TPIM)
13 DC Shunt Motor Speed Controller closed speed control of seperately excited dc Motor for 1/4 HP
14 Solid state voltage of 3 ph. I.M. (with motor 1/4 or 1/2 HP (TCT)
15 Speed control of 3 ph. Induction Motor Stator voltage control 1/4or
16 Single phase converter fed seperately excited DC motor.
17 D.C.Shunt Motor Control. Our E-T Thyset (13 MR).
18 Chopper drive Speed Cointrol of a D.C.Motor 0.5H.P. with tachogenerator. Our unit (MFDCM)
19 Three Phase Converter fed seperatelyt excited D.C.Motor. (TPSF + TPCON)
20 Function Generator freq.range (0.02Hz-2MHz) 20vpp o/p
21 Oscilloscope (20MHz),Dual Channel
22 Regulated DC Power Supply (0-30V/2A)Single.
23 Regulated DC Power Supply Dual
24 Analog meters (0-100mA,0-25mA,0-50mA, 0-1mA) (0-50mV, 0-100mV, 0-200mV)
25 Digital IC Trainer kit
26 Digital Multimeter Mastech MY-64
27 Op-Amp kit(inverting,Noninverting, Summer,Subtractor)
28 Op-Amp as Square wave Generator kit
29 Op-Amp as Sine wave Generator kit
30 Op-amp as Zero Crossing Detector Kit
31 Op-amp as Comparator Kit
32 Op-amp as Schmitt Trigger kit
33 Op-amp as Instrumentation Amplifier kit
34 IC-555-Astable Multivibrator kit
35 IC-555-Monostable Multivibrator kit
36 IC-555-Sequence Counter kit
37 PLL IC 565 (Lock Range and Capture Range) Kit
38 IC 723 Low Voltage Regulator Kit
39 IC 723 High Voltage Regulator Kit
40 IC 7805 Regulator kit
41 IC 7805Constant current Source kit
42 Study of JK Flip flop kit
43 Ring and Twisted Ring Counter Kit (IC 7476)
44 Study of Up/Down Counter using IC 74192/74193
45 N-Module Counter Kit using IC 7490/7493
46 Study and verify Shift Register Operation (using IC 7495)
47 A & D Converter using (IC ADC 0808)
48 D & A Converter using (IC ADC 0808)
49 Study of Multiplexer IC kit (using IC 74151)
50 Study ofDemultiplexer IC kit (using IC 74155)
51 Transistorised 3 Phase Voltage Source Inverter
52 60mhZ 500mSA/S Colour Digital Storage Oscilloscope
53 20MHZ Dual Trace Oscilloscope
54 Aplab dual output Power Supply output 0-32V/0-2A.
55 Aplab Single output Power Supply output 0-32V/0-2A.

List of Practical's conducted:

  • Power Electronics
  • Industrial drives and control
  • Analog and digital electronics

Electrical Machines-II Laboratory

The laboratory is well equipped with A.C. Electrical Machines like Transformers, A. C. Motors, Alternators, exciter, phase shifting transformer, stroboscope etc. Practical Sessions results in development of basic concepts and strong practical foundation.



Lab In-charge : Mr.R.V.Borkar/Mrs.Amruta Patki

Sr.No. Major equipment
1 A.C.Squirrel cage Induction Motor 5 H.P./3/1420 rpm coupled to D.C.Shunt Generator 3KW 220V/1500 rpm.
2 D.C.Shunt Motor 5H.P./220V couples to Synch. Alternator 3.5KVA/3Ph./415V.
3 Three point Starter for 5 H.P. Motor.
4 Field Rheostat for shunt motors
5 Field Rheostat for Generator.
6 Field Diverters for Series Machines.
7 Rotor Resistance starter for 5 H.P. Motor
8 Automatic star delta starter for 5 H.P. Motor.
9 Autotransformer starter for 5 H.P. Motor.
10 D.O.L.Starter for 5 H.P.Motor.
11 A.C.Tachogenerator with meter.
12 Excitation unit for alternator
13 A.C.Motor Generator set
14 D.C.Motor coupled to Synchronous Alternator set.
15 Single Phase Induction Motor
16 Squirrel cage Induction Motor
17 Slipring Induction Motor
18 Rotor Resistance starter
19 D.O.L.Starter
20 Starter Unit
21 Excitation unit
22 3 Ph. Autotransformer 415/470 volt 15 amp.
23 1 Ph. A.C.Series Motor 1 HP 230Volt, 1440 rpm, 50cy. Spdp with round dial spring balance
24 ICTP 415Volt, 32 Amp Samrat make
25 Necessary mountings for Rheostats 3 point starters, dimmers etc.
26 5HP Shunt wound DC Motor coupled to 3KVA Alternator
27 3 Point starter
28 3ph/415V/continuous Inductive Load

List of Practical's conducted:

  • Machine I
  • Industrial drives and control
  • Machine II
  • Electrical and Eelectronics Engineering

Electrical Machines-I Laboratory

Electrical Machines Laboratory includes equipments like D.C. Generators, D.C. Motors and other accessories. The study of performance helps in giving the practical know how of actual Electric Machines. Practical Sessions results in development of strong foundation and to inculcate the basic concepts in students regarding the Electrical Machines.



Lab In-charge : Mr.H.R.Shirke/Ms.Madhyama Wankhede

Sr.No. Major equipment
1 D.C.Shunt Motor 5 H.P./220V 1500 rpm coupled to D.C.Shunt Generator 3 KW 220V/1500 rpm.
2 D.C.Shunt Motor 5 H.P./220V 1500 rpm coupled to D.C.Series Generator 3 KW 220V/1500 rpm.
3 D.C.Shunt Motor 5 H.P./220V 1500 rpm coupled to D.C.Compound Generator 3 KW 220V/1500 rpm.
4 D.C.Identical Shunt Machines coupled to each other 5 H.P. 220V, 1500 rpm.
5 D.C.Identical Series Machines coupled to each other 5 H.P. 220V, 1500 rpm.
6 D.C.Shunt Motor 5 H.P./220V/1500 rpm with brake drum loading arrangement.
7 D.C.Shunt Motor 5H.P./220V/1500 rpm with flywheel mounted on shaft.
8 Two Point Starter for 5 H.P.Motor
9 Three Point Starter for 5 H.P.Motor
10 Four Point Starter for 5 H.P.Motor.
11 Field Rheostat for shunt motors.
12 Field Rheostat for Generator.
13 Rectifier panel
14 Necessary mountings for Rheostats 3 point starters, dimmers etc.
15 Tachogenerator 0-10000 rpm

List of Practical's conducted:

  • Machine I
  • Industrial drives and control
  • Machine II
  • Electrical and Eelectronics Engineering

Electrical Measurement and Control System Laboratory

This Lab is equipped with various transducers to measure the non-electrical quantities like pressure, temperature, load etc. The laboratory is well equipped with various instruments, kits and accessories. Like Servo transmitter and receiver, Position Control of servomotor. Practical Sessions are performed on MATLAB using SIMULINK, SIMPOWER and control toolbox for analyzing different control systems.



Lab In-charge : Mrs.V.S.Jape Ms.M.B.Zambre

Electrical Measurement Laboratory Equipments

Sr.No. Major equipment
1 Instek GOS-620, 20Mhz, Dual trace 1 MV, sensitivity oscilloscope Sr. No. 2K3 1024
2 3 &1/2 Digit Digital Multimeter model masteck MY 64 Sr. No. 2K3/12-64-01, 2K3/12-64-02, 2K3/3-64-09.
3 Current Transformer of 15VA, 25:5:1 Amp. Ratio on fiber glass sheet with banana pins etc.
4 Potential transformer 15VA 230V, 1:1 ratio on fiber glass sheet with banana pins etc.
5 Current Transformer of 15VA, 25:5:1 Amp. Ratiowith terminals on backelite sheet and marking.
6 Potential transformer 15VA 230/230V, with terminals on backelite sheet and marking.
7 Potential transformer 15VA 230/115V, with terminals on backelite sheet and marking.
8 SPDT 30 Amp. Switch
9 SPST 30 Amp Switch
10 DPDT 30 Amp Switch
11 Single Ph. Transformer 1KVA, 0/115/230Volt.
12 Inductive load 10Amp.
13 Capacitive Load 10Amp.
14 Standard Resistances
15 3 Ph. Energymeter 2 element 415V
16 Rheostat 1.2A/750 Ohm
17 Rheostat 1.7A/300Ohm
18 Rheostat 5A/50Ohm.
19 Kelvins double bridge
20 Portable potentiometer
21 PLC Trainer
22 LVDT
23 Strain gauge
24 Instrumentation tutor kit
25 Pressure Transducer Bourdon tube/bellow/ diaphgram
26 Speed Measurement trainer

Control System Laboratory Equipments

Sr.No. Major equipment
1 PC based DC Servo motor Control system
2 PC based Syncro Transmitter & Receiver motor system
3 based Potentiometer Error Detector Training System
4 PC based Incremental Rotary Encoder Training System
5 Study of PID Training System
6 PC based Temperature Control System using PID

List of Practical's conducted:

  • Control System I
  • Electrical measurement and instumentation

Basic Electrical Engineering Laboratory

The objective of this laboratory is to familiarize students with the important basic concepts to stand sturdily in rapidly evolving world of modern technology. We have well equipped Basic Electrical Engg. Lab to improve these basic concepts.



Lab In-charge : Mrs.M.D.Tuljapurkar/Mrs.Preethi T.I.

Sr.No. Major equipment
1 1Ph. 230V, 10A, lamp bank load with accessories
2 3Ph,415V,15A, lamp load with accessories
3 1 Ph. Dimmerstat 0-230V, 10A closed type.
4 3 Ph. Dimmerstat 415/415V 10A closed type.
5 D.C.Ammeter 0-2A, 5-10A PMMC or electrodynamometer type.
6 D.C.Voltmeter 0-75-150V & 0-300-750V PMMC or electrodynamometer type.
7 A.C.Ammeter 0-1-2A, 0-5-10A, 0-10-20A.
8 A.C.Voltmeter 0-75-150V, 0-300-750V MI or electrodynamometer type.
9 Low p.f. wattmeter 1-2A, 75/150/300V, 100W.
10 Wattmeter 5-10A, 150/300/600V.
11 Megger (500V) 100m hand drive.
12 DMM Autorange
13 Energymeter (1 ph. 230V, 10A.)
14 Single phase x'mer 1 KVA
15 D.C.Power supply with thyristorized speed controller 230V, 5A, 1500 rpm.
16 Rectifier 230V, D.C. 20-25A
17 Lamp Bank load 3 ph, 415V, 10A.
18 Lamp Bank load 1 ph, 415V, 10A.
19 D.C. shunt motor 1 H.P. 1500 rpm Arwa make.
20 3 Point starter for D.C. Shunt Motor.
21 1 Ph. X'mer 230/115V 100 VA.
22 3 ph. Induction Motor, 1 H.P. 1440 rpm.
23 3 Ph. Alternator coupled D.C.Shunt Motor set alt. 2 KVA, 415V, 3 Ph. 230V, D.C.Shunt Motor
24 3 Ph. Synchronous Motor
25 1 Ph. Auto-transformer 0-230V, 15A, closed type.
26 D.C.Series Motor 1 H.P. 1000 rpm.
27 TPST switch 15A/30A. 430VA
28 Loading arrangement with spring balance for D.C. Shunt Motor.
29 A.C.Voltmeter 0-600V. kit
30 D.C.Voltmeter 0-300V
31 D.C.Motor Speed control trainer kit with a H.P. 230V, D.C.Shunt Motor.
32 Digital Tachometer 0-10000 rpm control type.
33 Rheostat 70 Ohm, 1-2 A.
34 Rheostat 290 Ohm, 2/8 A.
35 Wattmeter 150/300V, 5-10A, p.f.1
36 Wattmeter 150/300V, 5-10A, p.f.0.2
37 1 Ph. Dimmerstat 4 Amp., 8Amp.
38 3 Ph. Dimmerstat 8 A.
39 Rheostat 100Ohm/5Amp. 500Ohm/2Amp. 20Ohm/10Amp.
40 Dual Power Supply (0-30V/2A)
41 Milliammeter (0-20mA, 0-50mA, 0-100mA)
42 Megger 0-200Mohm digital
43 Drill machine (Bostch/KPT make)

List of Practical's conducted:

  • Basic Electrical Engineering
  • Projects

Power system and Switchgear laboratory

The laboratory is well equipped with the simulated models of transmission lines and electrical machines to represent the power system network. In the Practical Sessions the various components are studied to develop the analyzing capabilities of the students. Along with the normal conditions the analysis of the faulty conditions of power system are also studied for their simulation using software like, Simulink and Simpower toolboxes of MATLAB. High voltage experiments & testing is carried out using H.T.Transformer, horizontal sphere gap arrangement etc.



Lab In-charge : Mrs.V.V.Khatavkar/Mr.Kamalkant

Sr.No. Major equipment
1 Transmission line model 200Km.
2 Stroboscope 10,000 RPM.
3 Phase Shifting X'mer
4 Switchgear Testing kit
5 Merz Price Protection of Transformer
6 Distance Protection of Transmission line.
7 Sphere Gap Unit
8 Oil Testing Kit.
9 H.V.Transformer 0-50KV
10 D.C. Motor 5 HP 230V, 19A,1500 rpm coupled to 3 phase alternator 3 KVA 415 volt.
11 Wattmeter AC/DC (0-75-150-300V)(0-1-2A).
12 Multimeter digital meco make
13 Rheostat 750 Ohms 1.2A & 100 Ohm)
14 Rheostat 50 Ohms, 10Amp
15 Earth Tester (Meco)
16 DC Motor 5 HP 230Volt, 19A, 1500 rpm, coupled to 3 ph. Alternator 3 KVA, 415 volt, 4.2 A, 50 Hz, 1500 rpm.
17 3000A Clamp meter.
18 500A Clamp meter

List of Practical's conducted:

  • Power System II
  • Power Quality
  • Switchgear and Protection
  • High Voltage engineering
  • Material Science

PG Laboratory

This Lab is equipped with various control equipments like DSO, Process control Unit and associated control system software etc. various licensed technical software like Lab view, MATLAB and also application software and System software are made available. Practical Sessions are performed on MATLAB using SIMULINK, SIMPOWER and control toolbox for analyzing different systems. In the computer laboratory separate computer per student per batch is available. Each computer has latest configuration. The networked laboratory is having high speed Internet facility. The students have access to many international technical papers and journals. Additional Authorized License copy of software's are also installed



Lab In-charge : Mr.Vijay Marathe

Sr.No. Major equipment
1 Process Control Unit for Pressure, Temperature & flow measurement
2 50 MHz Digital Storage Oscilloscope
3 Lenovo Think Center M70e intel core 2 duo E 7500, 3 MB- L2, 2.93GHz, 1066 MHz FSB
4 LCD Projector (Benq) MP 515 with ceiling mounting kit
5 MATLAB software for PG common purchase

List of Practical's conducted:

  • ME lab practice